DPA2402 4 Channel Network Amplifier Low/Hi-Z
Product Info
The AtlasIED DPA2402 features a combination of flexibility, performance and control to provide high value features for applications that require more than just great sound. The AtlasIED DPA2402 is a rugged, lightweight commercial power amplifier designed for churches, auditoriums, fitness centers and more. The network based DPA2402 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.
The unit is factory preconfigured in a two-channel 70V mode. If the design requires four channels of low impedance amplification, the amplifier can be configured as 4-channel model with either 4Ω or 8Ω load impedances. Many system designs require both low and high impedance amplification. This unit can be configured to deliver 70V/100V for a paging/background system on a single channel plus two additional 4Ω or 8Ω amplifier channels for a foreground stereo application.
Product features:- Configurable for Use as 2-Channel 70.7V Amplifier
- Configurable for Use as 4-Channel 4Ω Amplifier
- Configurable for Use as Single Channel 70.7V and 2-Channel 4Ω Amplifier
- Networkable with On Board GUI
- Configurable DSP Via GUI
- Site Manager Software with Network Auto-Discovery Fault Reporting, Input & Output Status, Standby Status and Remote Activation via a Scheduler Timer
- User Page with Assignable Input & Output Level Control
- Mute Assignments Triggered Via Audio Signal or Contact Closure
- Audio Sense Turn-On/Off
- Four Balanced Inputs
- Optional Accessory Card Slot for 4-Channel Dante™ Receiver Card or (2) Mic / Line, (2) Aux Input Card
- PC, iOS, & Android Compatible
Rack Units: 2
Height 3.47" (89mm)
Width 19" (483mm)
Depth 14.5" (368mm)
Signal to Noise Ratio -100dB Below Rated output (A-Weighted)
Weight 20.8 lbs. (9.53kg)
