 |
 |
 |
|
This item is no longer available. It has been replaced by the Crown XLS1000.
Specifications -
-
-
Sensitivity (volts RMS) for full rated power at
- 4 ohms
| -
1.25 | -
-
-
| Frequency Response (at 1 watt, 22 Hz - 20 kHz) | -
+0 dB, –1 dB | -
-
-
Signal to Noise Ratio below rated power (20 Hz to
- 20 kHz, inputs terminated)
- A-weighted, below rated power
- No weighting, below rated power
| -
> 100 dB
- > 95 dB
| -
-
-
| Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz | -
< 0.5% | -
-
-
| Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB | -
< 0.3% | -
-
-
| Damping Factor (8 ohm): 10 Hz to 400 Hz | -
> 200 | -
-
-
Crosstalk (below rated power)
- at 1 kHz
- at 20 kHz
| -
–75 dB
- –50 dB
| -
-
-
Input Impedance (nominal) (balanced,
- unbalanced)
| -
20 kilohms, 10 kilohms | -
-
-
Load impedance
- Stereo
- Bridge mono
| -
4-8 ohms
- 8 ohms
| -
-
-
| AC Line Voltage and Frequency Configurations Available (± 10%) | -
120 VAC 60 Hz
- 100 VAC 50/60 Hz
- 220 VAC 50 Hz
- 230-240 VAC 50 Hz
| -
-
-
| Ventilation | -
Flow-through ventilation from front to back | -
-
-
| Cooling | -
Internal heat sinks with forced-air cooling | -
-
-
Air Volume Requirements (per minute
- per unit)
| -
80.15 ft3 (2.27 m3) | -
-
-
| Dimensions: Width, Height, Depth | -
XLS 202, 402, 602, 802: EIA Standard 19"W (EIA RS-310-B) x 3.5” (8.9 cm) H x15.2" (38.6cm) D.
- XLS 5000: EIA Standard 19"W (EIA RS-310-B), 5.25” ( 13.3 cm) H x 15.5” (39.5 cm) D.
| -
-
-
| Net Weight, Shipping Weight | -
XLS 202: 23.0 lb (10.4 kg), 28.0 lb (12.7 kg)
- XLS 402: 25.7 lb (11.7 kg), 30.7 lb (13.9 kg)
- XLS 602: 29.0 lb (13.2 kg), 34.0 lb (15.4 kg)
- XLS 802: 35.5 lb (16.1 kg), 40.5 lb (18.4 kg)
- XLS 5000: 62.0 lb (27.7 kg), 74.0 lb (33.6 kg)
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 300W/ch @ 4 ohms, 200W/ch@8ohms, 21.0 lbs,2 rack spaces.
|
|
|
|
|
|
|
|
|
